Model 2000 Pneumatic Powernailer™POWERNAIL® CO.REV 13.04.25WARNINGOPERATION AND MAINTENANCE MANUAL MANUAL DE OPERACION Y DE MANTENIMIENTOMANUEL D’INST
10ITEM DESCRIPTIONAvail.PART #1 SCREW M4 x 10mm n/a2 BUSHING n/a3 EXHAUST COVER n/a4 WASHER n/a5 SCREW M5 x 20mm n/a6 SPRING WASHER 5 n/a7 CYLINDER CA
11MODEL 2000 SCHEMATIC46442765596160584746454357484956515076427580777378717274
1-1/4” 20 GAGE POWERCLEATS®1” 20 GAGE POWERCLEATS®POWERNAIL COMPANY, INC. 1300 Rose Road, Lake Zurich, IL 60047 US Phone: 1-800-323-1653 or 847-847-30
2The Model 2000 trigger-pull nailer is designed to bring Powernail quality and ooring expertise to a pneumatic nailer. The Model 2000 is designed fo
SAFETY INSTRUCTIONS3When operating this Nailer, the operator and others in the work area should ALWAYS wear approved SAFETY GLASSES, with front and si
4The Model 2000 nails down ooring from 5/16” to 9/16” using the Powernail FLEX adjustable foot assembly that can be adjusted to t different ooring
5CONNECTING THE TOOL TO AN AIR SUPPLYYour air tool is fully assembled when you receive it. Before using it, attach the air line and desired air system
6 LOADING THE FASTENERS1. Depress the LOCK (61) to release the MOVABLE CHANNEL GUIDE (44) and slide the channel guide out fully as shown in Figure 3.2
REGULAR MAINTENANCE1. Frequent, but not excessive, lubrication is required for best performance. Oil added through the airline connection will lubrica
8CLEARING A JAMDisassembly: (See Figure 5.) 1) NOTE: Do not remove the two M5 screws (80).2) Remove the two adjusting knobs (76) and cap screws (77)
PROBLEM POSSIBLE CAUSE SOLUTION1Air leaking atTrigger area1. O-ring (31) in trigger valve is damaged.2. Trigger valve head (30) is damaged. 3. Trigger
Kommentare zu diesen Handbüchern